Balsa Stripper

This stripper has been engineered to accurately cut balsa sheets and many other materials such as foamed PVC, plastics, cork, foams, etc.. up to 1/4" (6mm) thick into strips up to 1/2" (12mm) wide. This design has a lead screw with 32 threads per inch so that each turn of the wheel will move the blade 1/32 of an inch (0.8 mm). Starting with the blade in the initial position, four turns will produce a perfect 1/8" (3mm) strip.

The blade furnished is the Type 11 used in modelling knives so they are replaceable. To install or replace the blade, loosen the retaining screws and slip a blade between the retainer and the slide. Place on a smooth surface and with the blade nearly vertical, tighten the screws. Note that the stripper can be set up for left or right-handed use. Stripping is best done on a smooth surface. Draw the stripper toward you along the edge of the material to cut.

This set is including:

• 1x Stripper Tool
• 1x Hobby Blade