EasyFit Digital Plug (DPR) - Long Type

Scalextric Digital:

Scalextric Digital represents a groundbreaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!

Easyfit Digital Plug:

Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.

The conversion only requires a small screw-driver and takes less than sixty seconds to perform.

To Convert a DPR car

1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis.

Features:

The F1 EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.

Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another.

There is no need for a soldering iron or modelling expertise.

Note:

• C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.
• To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug.
• Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.
• Four car and six car powerbases available

Please Note:

• One supplied.